A. Proctor Group

A Proctor Group

PROCTOR Air® Breathable Roof Membrane - 1m x 50m

Proctor Air® is an air and vapour-permeable, highly water-resistant roofing underlay. Its characteristics allow even very complex pitched roofs to breathe, without the need for air gaps or secondary venting. The high-performance meltblown core at the heart of Proctor Air allows natural air movement to ‘supercharge’ the passage of moisture vapour from the roofspace, making the formation of condensation in the roofspace virtually impossible.

A Proctor Group

PROCTOR Protech VOC Flex Reinforced VOC Barrier - 2 x 50m

Protech VOC Flex complies with CIRIA C748 and BS8485:2015 +A1 2019. It is a high performance 6 layer flexible proprietary reinforced VOC gas barrier and is suitable for use on brownfield sites that require protection from dangerous contaminants such as hydrocarbons. Protech VOC Flex has been developed to ease installation on site due to the flexibility of the membrane. It is also suitable as a high performance damp proof membrane.

A Proctor Group

PROCTOR Protech Radon 400 Radon Barrier/DPM - 2 x 50m

Protech Radon 400 is a high-performance proprietary reinforced radon barrier. Due to its unique composition, the membrane is extremely robust and flexible and, therefore, easy to install on-site. It can be jointed with the use of our Protech tapes or heat welded. Protech Radon 400 also acts as a high-performance damp-proof membrane, therefore there is no need to install a separate DPM.

A Proctor Group

PROCTOR Fireshield® Intumescent Coated Vapour Permeable Membrane - 1.1 x 20m

Fireshield is a vapour permeable walling underlay with an intumescent coated surface. Fireshield is suitable for all walling applications including those in multiple storey buildings. The intumescent coating helps protect the substrate by reducing the risk of fire taking hold and significantly reduces the formation of droplets and smoke. It is installed and fixed to the substrate in the same manner as standard breather membranes using mechanical fixings.

A Proctor Group

PROCTOR Probreathe A2 Air Vapour Permeable Membrane - 1.5m x 50m

Probreathe® A2 Air is a woven glass fibre membrane designed to provide good water resistance and breathability to the building fabric. This membrane is air permeable and will be installed either directly to the sheathing board, or over the insulation, providing a Reaction to Fire classification of A2-s1,d0.

A Proctor Group

PROCTOR Probreathe A2 Airtight Membrane & PU Coating - 1.5m x 50m

Probreathe® A2 is an airtight woven glass fibre membrane with a PU coating. The membrane combines breathability, good water resistance and airtightness in one membrane. It has a Reaction to Fire classification of A2-s1,d0 when installed freehanging or onto a substrate which is minimum A2-s1,d0.

A Proctor Group

PROCTOR Procheck® FR200 Vapour Control Layer- 1.6m x 50m

Procheck FR200 is used as as a vapour control layer in roof and wall structures in new build and renovation projects. Procheck FR200 has a Reaction to Fire classification of B-s1, d0 which provides assurance of fire performance for the structure. Procheck FR200 air and vapour tight membrane improves energy efficiency and reduces the condensation risk. Procheck FR Tape is an aluminium faced, air and vapour tight tape designed for use with Procheck FR200.

A Proctor Group

PROCTOR Facadeshield UV Breather Membrane - 1.5m x 50m

Façadeshield® UV is designed specifically to ensure the building fabric maintains good water resistance and breathability behind open jointed cladding. Leading research has culminated in a non-woven breathable membrane that combines exceptional water resistance and UV resistance with the aesthetically pleasing dark colour to provide a “shadow” appearance within open rainscreen façades. Façadeshield UV enhances the air tightness of the building whilst reducing the risk of condensation due to its’ high vapour permeability, yet airtight fabric. The product comes with the reassurance of a CE Mark showing the product’s fitness for purpose in the façade application, making it the obvious choice behind open jointed façades. To protect the membrane from mechanical damage, the joint openings in the façade covering have to be less than 30% of the area, and a maximum of 30mm wide.

A Proctor Group

PROCTOR Cladshield Breather Membrane - 100m x 1.6m

Proctor Cladshield is a high-performance breather membrane designed primarily for use in lightweight industrial, roofing and wall systems. Cladshield controls the escape of water vapour from the roof and cladding structure whilst increased water resistance prevents the ingress of rain or moisture.

A Proctor Group

PROCTOR Profoil 861 Reflective Reinforced VCL - 50m x 2m

Proctor Profoil 861 is a heavyweight, reinforced, UV-stabilised vapour control layer with an aluminium foil core which gives a high water vapour resistance of Sd 1700m. This makes it ideal for high-risk applications such as swimming pools (unaffected by chlorine) and textile factories. The aluminium foil is protected on both faces by polyethene for corrosive situations. The reinforced scrim ensures minimal tears and robustness to withstand tough site handling while the encapsulated foil ensures high vapour resistance.

A Proctor Group

PROCTOR Framepro W1 Vapour Permeable Air Barrier - 50m x 1.5m

FramePro W1 is a vapour-permeable, airtight wall underlay, which is durable, flexible and lightweight allowing for easy installation. FramePro W1 is water resistant and has a resilient composition, which resists punctures and tears during installation. FramePro W1 can be utilised with Wraptite Tape to provide a simplified and robust method of achieving low air leakage rates, particularly when installed on-site, as is typical with large-scale rain screen construction, or when sealing junctions between prefabricated building components. By reducing the likelihood of failures to meet designed airtight levels, FramePro W1 helps ensure “as designed” performance is achieved. This helps to narrow the performance gap between as-designed and actual energy performance. FramePro W1 is designed to cost-effectively replace conventional breather membranes whilst increasing airtightness.

A Proctor Group

PROCTOR Wraptite UV Self-adhesive UV Vapour Permeable Airtight Membrane - 1.5 x 50m

Proctor Wraptite UV is a Class B fire-rated membrane that combines the best properties of vapour permeability and air tightness in one innovative, self-adhering product, which is specifically designed for use behind open jointed cladding. Wraptite UV has exceptional water resistance and UV resistance to provide a “shadow” appearance within open rainscreen façades. Manufactured from polyester and a functional coating, with a proprietary acrylic moisture vapour permeable adhesive and silicone-coated PET release liner. Wraptite UV bonds (no mechanical attachment) to multiple substrates for air tightness and ease of installation, negating the requirement for a primer, sealants or tapes. The product provides an initial grab with a full curing time of approximately 6 hours depending on environmental conditions. Wraptite UV prevents lateral air movement enhancing the buildings thermal performance. With a rating of Sd 0.06m, it provides a high vapour permeability in a commercial quality, self-adhered, airtight breathable membrane. To protect the membrane from mechanical damage, the joint openings in the façade covering have to be less than 40% of the area, and a maximum of 50mm wide. Whilst for use behind open jointed cladding, the membrane is specifically designed for those who require protection against water ingress for extended periods of time, in a range of applications, including the storage and transportation of volumetric modules, offsite panelised systems and/or within high rise façade construction. Wraptite UV would also provide a shadow gap detail behind window flashing details, or in open jointed façade systems in offsite construction, rainscreen and timber cladding systems.

A Proctor Group

PROCTOR Procheck® 500 VCL Reinforced Vapour Barrier - 50m x 2m

Procheck 500 is a strong reinforced polyethylene vapour control layer with a vapour resistance of Sd 100m, making it suitable for low to medium risk applications e.g. offices, schools & housing. The woven extruded polypropylene multifilament scrim reinforcement provides improved nail tear resistance and robustness to withstand tough site conditions. The sheet is transparent allowing visibility to the substructure to ease the installation. Procheck 500 is the grade utilised by many leading system manufacturers. It is UV-stabilised and unaffected by chlorine.

A Proctor Group

PROCTOR Procheck® 125 VCL Reinforced Vapour Barrier - 50m x 2m

Procheck 125 is a lightweight reinforced polyethylene vapour barrier which can be utilised in a variety of commercial applications. Procheck 125 can be installed where very high moisture vapour resistance is not a necessity but a strong, durable airtight membrane is. Procheck 125 can also be used as a separating layer above Provoid 25 Gas Venting Layer to prevent grout from the concrete pour entering into the void. This will only be used when the Protech Gas Membrane is going to be placed above the slab. It is designed to be loose laid on the Provoid 25 Gas Venting Layer with a 300mm lap.

A Proctor Group

PROCTOR Spacetherm® A1 Fire Rated Silica Aerogel Blanket

PROCTOR Spacetherm® A1 Fire Rated Aerogel can be used to help the issue of hard-to-treat walls in the UK. An ultra-thin insulation for thermal upgrades, saving valuable space without altering the exterior fabric of the building. Its remarkable performance is achieved through the use of flexible aerogel blankets. The insulation used in Aerogel is material derived from silica gel. What is Aerogel?Although originally developed by Samuel Stephens Kistler in 1931, aerogel is more commonly associated with NASA who have invented groundbreaking methods of creating new types of aerogels that could change the way we think about insulation. Aerogel is a synthetic porous ultralight gel-like material created by removing the liquid component from gel and replacing it with gas, without any degradation to the gel structure. This produces an extremely low thermal conductivity which is perfect for thermal insulation.

A Proctor Group

PROCTOR Profloor Dynamic Acoustic Batten - Standard

Proctor Profloor Dynamic® Batten System is specified and detailed similar to a standard batten for the purpose of supporting the chosen floor finish but has the advantage of providing effective isolation of the floor finish from the structure. Significant improvement in Impact and Airborne Sound Insulation can be obtained when using Profloor Dynamic Batten System in timber or concrete construction. Certification: RD Compliance: FFT1, FFT3 & FFT80 (Scotland)

A Proctor Group

PROCTOR Procheck® A2 FR Vapour & Airtight Membrane - 50m x 1.2m

Proctor Procheck A2, is a vapour and airtight membrane. Procheck A2, with it’s Class A2-s1,d0 fire classification to BS EN 13501-1, is considered non-combustible with no contribution to fire. Its composition comprises of the glass fibre backing, with a pure aluminium foil and clear lacquer coating. This composition affords the membrane its Class A2 performance as well as giving it a high degree of vapour controlling properties. The membrane comes with a high vapour resistance, as well as being airtight, which allows its use as an AVCL in the construction. Providing high levels of airtightness can ensure the thermal efficiency of the building. The integral foil layer, with its protective clear lacquer coating, gives this A2 membrane the unique added benefit of having a low emissivity surface. This means that the membrane, when installed with the foil face next to a service cavity, with a minimum depth of 19mm, will provide additional thermal performance to the overall wall construction. Procheck A2 air and vapour tight membrane improves energy efficiency and reduces the risk of condensation.

A Proctor Group

PROCTOR MgO Plasterbond for Spacetherm Wall Liner & Multi

Product OverviewMgO Plasterbond is a mineral based plaster primer which is designed to control high suction backgrounds on MagnesiumOxide (MgO) boards whilst still remaining vapour open. The primer’s fine gritted surface provides a key for a new suitableplaster to bond to.MgO Plasterbond is independently tested by audited facilities Sheffield Hallam University and PRA coatings, for vapourdiffusion to reassure you that water vapour is not trapped in the fabric of your building. No VOC, no odour, water-based andcertified as vapour permeable.Our natural mineral and water-glass primer free from any other co-binders such as solvents, gypsum and cement and is nonhazardous. MgO Plasterbond plaster primer is available in 17kg UN certified containers and is been specially formulated foruse with magnesium oxide faced Spacetherm Wall Liner and Spacetherm Multi boards. Preparation• Substrates must be clean and dry and free from any loose material prior to application.• Test a small area for suitability with your specific materials before use.• Do not use on contaminated surfaces, extreme environments or in any unusual circumstances.• Do not store or use inextremes of temperature (<5C or above 30C).• Protect surrounding surfaces, particularly glass.• Store in airtight containers and used within 12 months.• Do not store, or use in temperatures <5C or above 30C. Aftercare• Clean any splashes and spills immediately.• Allow to dry completely before further application, plaster coverings or decoration.• Wash splashes, tools and brushes with water.• Dispose of all surplus material in accordance with your local regulations (EWC 06 02 99).• Cleaned tins are 100% reusable and recyclable.• If splashed on the skin wash off immediately with water.• Wear the appropriate Personal Protective Equipment• Refer to the Safety Data Sheet before use.

A Proctor Group

PROCTOR Procheck® Adapt Variable VCL Membrane - 50m x 1.5m

Proctor Procheck® Adapt is a high-performance variable-permeability vapour control layer for use in a variety of commercial and residential applications. It is designed to protect the building fabric from potential risks of condensation and it will also act as an airtight barrier. Its variable permeability adapts to changes in humidity levels becoming more resistant in Winter and more permeable in Summer. This means the building fabric is protected from damaging moisture levels during cold, wet months of the year and it will allow the fabric to dry out effectively in warmer, drier months. Procheck Adapts’ translucent structure eases fixing to structural frames and in conjunction with its integral tape allows for a fast installation time.

A Proctor Group

PROCTOR Wraptite® Airtight Tape

Proctor Wraptite Tape is an airtight, tear-resistant tape providing a useful way of stopping unnecessary air leakage around openings and overlaps. Wraptite Tape's flexibility facilitates ease of application and detailing, while its resilient composition resists punctures and tears during construction. It can be left exposed for up to 120 days during construction. It fully bonds to all standard substrates, with no primer required, suppressing air leakage around joints, openings and penetrations. It is also suitable for permanent airtight sealing of membrane overlaps and for taping insulation joints. Wraptite Tape’s high vapour permeability allows damp sheathing to dry quickly and moisture vapour to escape. This ensures good indoor air quality and reduces the likelihood of mould, mildew, condensation, timber distortion and metal corrosion. Wraptite Tape contains no VOC’s Wraptite Tape is also available with a split-release liner for ease of installation.

A Proctor Group

PROCTOR Spacetherm® Multi Laminate (Aerogel + MgO)

Spacetherm Multi is a high-performance laminate specifically designed to be laid directly onto existing floors & walls. Spacetherm Multi consists of Spacetherm Aerogel insulation blanket bonded to a 6mm Magnesium Oxide Board. Spacetherm Aerogel blanket is available in various thickness from 5mm to 40mm (in multiples of 5). For other thicknesses, please contact us. The solution is ideal for use in applications where low U-values are required and room space is at a premium (such as loft conversions). Spacetherm Multi can achieve similar performance to other insulation systems, but at a fraction of the thickness. This allows specifiers greater flexibility and higher performance for refurbishment projects. What is Aerogel?Although originally developed by Samuel Stephens Kistler in 1931, aerogel is more commonly associated with NASA who have invented groundbreaking methods of creating new types of aerogels that could change the way we think about insulation. Aerogel is a synthetic porous ultralight gel-like material created by removing the liquid component from gel and replacing it with gas, without any degradation to the gel structure. This produces an extremely low thermal conductivity which is perfect for thermal insulation.

A Proctor Group

PROCTOR Spacetherm® Silica Aerogel Blanket

The ongoing issue of hard-to-treat walls in the UK can be overcome utilising Spacetherm Aerogel - ultra-thin insulation for thermal upgrades, saving valuable space without altering the exterior fabric of the building. Its remarkable performance is achieved through the use of flexible aerogel blankets. The insulation used in Aerogel is material derived from silica gel. What is Aerogel?Although originally developed by Samuel Stephens Kistler in 1931, aerogel is more commonly associated with NASA who have invented groundbreaking methods of creating new types of aerogels that could change the way we think about insulation. Aerogel is a synthetic porous ultralight gel-like material created by removing the liquid component from gel and replacing it with gas, without any degradation to the gel structure. This produces an extremely low thermal conductivity which is perfect for thermal insulation.

A Proctor Group

PROCTOR Procheck® 300 VCL Reinforced Vapour Barrier - 50m x 2m

Procheck 300 is a lightweight, reinforced, polyethylene vapour control layer for use within roof and wall constructions to prevent warm, moist air escaping from inside the building and condensing within the insulation. The woven, polypropylene, multifilament scrim reinforcement provides excellent resistance to tears and punctures to withstand tough site conditionsand is unaffected by chlorine. 

A Proctor Group

PROCTOR Frameshield 100 Wall Breather Membrane - 100m x 1.4m

Proctor Frameshield 100 is a spun-bonded polypropylene material developed primarily as a breather membrane for use in timber frame walls and light steel frame applications. Applied in the factory during manufacture or on-site, Frameshield 100 affords effective protection of timber frames during construction against wind-driven rain, snow and dust. Once completed, the high water vapour permeability of Frameshield 100 allows the controlled escape of vapour from within the timber frame whilst restricting the ingress of rain and moisture.

A Proctor Group

PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane - 1.5 x 50m

Proctor Wraptite combines important properties of vapour permeability and airtightness in one affordable self-adhering membrane. It fully bonds to virtually any substrate, with a key benefit being its ease of installation, negating the requirement for sealants or tapes. It makes a significant contribution to a building’s thermal performance by preventing lateral air movement, but it also contributes to a healthy living environment and a healthy building thanks to its vapour permeability. With an Sd of 0.039m, it provides a high degree of vapour permeability in a commercial-quality, self-adhered, airtight breathable membrane.

A Proctor Group

PROCTOR Spacetherm® Cold Bridge Strip

PROCTOR Spacetherm® Cold Bridge Strip is designed to prevent cold bridging through a component or element of a structure. Spacetherm CBS (Cold Bridge Strip) consists of Spacetherm Aerogel insulation encapsulated in polyethelene. Spacetherm CBS is an ideal choice for timber or steel frame structures and on request, can be cut to a variety of widths to suit different applications. In addition to timber and steel structures, it can also be used in other applications where cold bridging is an issue.

A Proctor Group

PROCTOR Reflectatherm Plus

Reflectatherm Plus is a reflective, high resistance air and vapour control layer for internal walls, ceilings and floors, specifically designed to enhance the thermal performance when placed on the warm side of the insulation. Certification:- Help meets the requirements of the Part L in England and Wales, Section 6 in Scotland, and Technical Guidance Document L in Ireland.

A Proctor Group

PROCTOR Roofshield Breathable Roof Membrane - 1m x 50m

Roofshield is an air and vapour permeable, highly water resistant roofing underlay that has been made to the same high specification for over 20 years. It has consistently met the evolving demands of the roofing industry with reliable performance that has been demonstrated in the some of the toughest locations around the world. Its characteristics allow even very complex pitched roofs to breathe, without the need for airgaps or secondary venting. The unique meltblown core of Roofshield allows natural air movement to facilitate rapid vapour escape from the roofspace, making the formation of condensation virtually impossible. Certification: Fully BBA certifiedNHBC acceptance with no ridge ventsLABC and LABSS certificationComplies with BS 5534 Wind Zone: Zones 1 to 3

A Proctor Group

PROCTOR Plusfloor XPS Insulated Chipboard - 2.4m x 600mm

PROCTOR Plusfloor XPS insulated chipboard is the perfect choice for your flooring project. The chipboard is laminated and provides both thermal insulation and acoustic insulation due to its XPS material. This durable and sustainable chipboard has a length of 2.4m and a width of 600mm. Enjoy your flooring project with the exceptional insulation of the PROCTOR Plusfloor XPS insulated chipboard.