Rothoblaas

Rothoblaas

ROTHOBLAAS Alu Butyl Band Tape

ALU BUTYL BAND is the ideal reflective butyl adhesive tape for a wide variety of uses. Widely used in building roofing, repair of surface cracks, repair of motor homes, windows, boat seals, glazing and roofing.

Rothoblaas

ROTHOBLAAS Barrier ALU Fire A2 SD2500 (Reflective Vapour Control Membrane) (1.2m x 50m)

BARRIER ALU FIRE A2 SD2500 is a reflective vapour barrier which has been tested according to EN 13501-1 and classified as a non-combustible material (A2-s1, d0) for reaction to fire. Its reflectivity improves the energy performance of the construction panels: reflecting heat inwards up to 95% it increases thermal resistance. Thanks to the special aluminium film, BARRIER ALU FIRE A2 SD2500 is extremely UV-stable, ageing-resistant and non-combustible, offering protection even on the construction site. As it is non-combustible, it can also be used in combination with photovoltaic systems or at electrical voltage points. The combination of aluminium cladding and glass fibre reinforcement ensures high mechanical performance that remains unchanged over time.

Rothoblaas

ROTHOBLAAS Barrier ALU NET Adhesive 300 (Reflective Self-adhesive Vapour Control Membrane) (1.45m x 50m)

CompositionThe top layer of this vapour barrier is a functional aluminised PE film. The middle layer consists of a PE reinforcement grid. The bottom layer is a PE film. The adhesive is a solvent-free acrylate dispersion. The separation layer is a pre-cut removable plastic film. PerformanceWater vapour transmission (Sd) = 4000 m (EN 1931 standard). Thanks to its ability to reflect up to 70% of heat, the adhesive vapour control sheath improves the thermal performance of the construction panels. The composition of this vapour barrier and the reinforcement grid guarantee excellent dimensional stability even under mechanical stresses. Sealing Maximum resistance to the passage of water vapour and radon gas thanks to its special composition; ideal in combination with TERRA BAND UV and ALU BUTYL BAND for the perfect sealing of joints on site. The membrane, tested according to ISO/TS 11665-13, protects the building's perimeter and foundation structures, while minimising the presence of radon and eliminating health risks. Vapour barrier where it is put This adhesive barrier is placed inside the walls, floor or roof of a building to reduce the transmission of moisture through the structure. Its main objective is to prevent moisture condensation inside the walls, which could cause structural damage and mould problems. The membrane is also used to prevent the passage of radon gas indoors and avoid its harmful effects on health. The exact location of the vapour barrier may vary depending on the type of construction and project specifications, but in general, it is placed on the warm side of the structure. The warm side is closest to the interior spaces of the building, where a higher temperature is maintained than outside. The underfloor vapour barrier generally serves to protect the screed from rising damp and condensation, and is therefore applied before the screed is constructed. In the case of foundation floors, it also offers protection against radon gas infiltration. The vapour barrier on interior walls will be placed on the inner side of the wall, between the inner cladding (e.g. plaster or gypsum boards) and the outermost layer. The roof vapour barrier will be placed on the inner side of the roof structure, under the insulation and close to the living spaces. In addition, the vapour barrier must be placed so that it is continuous, avoiding cracks or breaks that could allow moisture to pass through. It is essential to follow the designer's instructions or manufacturer's specifications to ensure proper installation.

Rothoblaas

ROTHOBLAAS Barrier ALU SD150 (Reflective Vapour Control Membrane) (1.5m x 50m)

In winter, the reflective membranes applied indoors and coupled with an air gap, reflect heat back into the interior, transforming the gap into an insulating layer and increasing thermal performance. BARRIER ALU NET SD150 consists of an aluminised top layer, a reinforcing grid and a functional film. The reinforcing grid offers great resistance to the membrane, even in the event of pressure caused by insulating material being blown, which could give rise to mechanical stresses that the reinforcing grid compensates for. This ensures that the vapour barrier is always safely installed.

Rothoblaas

ROTHOBLAAS Barrier NET SD40 (Vapour Control Membrane) (1.5m x 50m)

The BARRIER NET SD40 vapour barrier is transparent, for a simple, fast and safe installation. The reinforcing grid offers great resistance to the membrane, even in the event of pressure caused by the insulating material being blown, which could give rise to mechanical stresses that the reinforcing grid can compensate for; in this way, the membrane is always installed safely.

Rothoblaas

ROTHOBLAAS Clima Control 105 (Variable Vapour Control Membrane) (1.5m x 50m)

CLIMA CONTROL 105 is the variable diffusion membrane with a highly variable vapour diffusion resistance (0.1 - 20 m), which gives the product the ability to adapt to the hygrometric conditions of the structure, depending on the interstitial relative humidity: in the case of high amounts of moisture, it behaves like a more breathable membrane, facilitating the structure drying.

Rothoblaas

ROTHOBLAAS Clima Control 80 (Variable Vapour Control Membrane) (1.5m x 50m)

CLIMA CONTROL 80 ensures a variable resistance to water vapour diffusion. It acts as a vapour control in low humidity conditions and as a breathable membrane in high humidity conditions. If it comes into contact with a high amount of moisture, the membrane is able to change from a vapour control to a breathable membrane, ensuring that the building envelope dries out. This ability to regulate the passage of water vapour according to climate and humidity guarantees maximum protection for timber structures. It is the ideal membrane for increasing the energy performance of packages and solutions for reconditioning existing structures: it can in fact be used with insulation from the inside of the building envelope, guaranteeing the structure total protection from the formation of interstitial condensation. Transparent, it is extremely easy to install. Tested by the PassiveHouse Institute as airtight certified components

Rothoblaas

ROTHOBLAAS Clima Control NET 145 (Reinforced Variable Vapour Control Membrane) (1.5m x 50m)

CLIMA CONTROL NET 145 is the membrane with reinforcing grid characterized by a variable resistance to vapour diffusion: maximum protection for walls and excellent security in insulation. It is the ideal solution to increase energy performance for packages and solutions for reconditioning of existing structures.

Rothoblaas

ROTHOBLAAS Clima Control NET 160 TT (Reinforced Variable Vapour Control Membrane) (1.5m x 50m)

Thanks to its special composition and reinforcing grid, the CLIMA CONTROL NET 160 membrane is not affected by mechanical stresses caused by staples, nails or wear caused by walking. The special PA film gives the product the ability to adapt to the hygrometric conditions of the building. If the membrane comes into contact with high humidity levels, it transforms from a vapour control layer into a breathable product, guaranteeing that the structure remains dry. Comes with tape pre applied for easier application.

Rothoblaas

ROTHOBLAAS Double Band (Double-sided Tape) (40mm x 50m)

Thanks to the special solvent-free acrylic adhesive compound formulation, the universal double-sided tape DOUBLE BAND ensures exceptional adhesion on the most common supports, even at low temperatures. It is the ideal solution for the precise jointing of concealed timber-to-timber and timber-to-membrane joints. The double-sided tape DOUBLE BAND provides a perfect concealed seal and offers weather protection and durability. In spite of the low thickness, the sealing will be secure thanks to the reinforcing grid. The special formulation of the acrylic glue ensures excellent stability against temperature ranges.

Rothoblaas

ROTHOBLAAS Easy Band Airtightness Tape (60mm x 50m)

EASY BAND universal tape is suitable for a wide range of applications. It can be conveniently applied to both the inside and outside of the building envelope, providing an extremely simple and secure seal on most common supports. The type of glue, its quantity and the special carrier make this tape the perfect solution for sealing on smooth surfaces and at high temperatures, preventing the tape from slipping in all those situations where the glue generally tends to soften.

Rothoblaas

ROTHOBLAAS Facade Band UV Airtightness Tape

Facade band uv universal tape: high uv resistance and excellent aesthetic performance The universal tape, resistant to UV rays FACADE BAND UV ensures high adhesion at both high and low temperatures, for a secure, airtight fastening. It has been designed for application on TRASPIR façade membranes and TRASPIR EVO 300, for a concealed effect that provides excellent aesthetic performance.

Rothoblaas

ROTHOBLAAS Flexi Band Airtightness Tape

Flexi band universal tape, the perfect tape for users looking for a versatile tape of outstanding quality. The combination of carrier and acrylic dispersion glue is designed for good adhesion even in extremely cold temperatures. Thanks to the special formulation of the acrylic glue, the universal tape FLEXI BAND achieves the highest level of safety against harmful emissions. It is among the Rothoblaas solutions tested by the PassiveHouse Institute as airtight certified components.

Rothoblaas

ROTHOBLAAS Fluid Membrane (Brush & Spray liquid membrane) 10kg

FLUID MEMBRANE is the synthetic waterproofing membrane that can be applied by roller, brush or spray. The synthetic resin mix is elastic and resistant to any movement of the sealed cracks. Thanks to its formulation, it offers perfect adhesion, is suitable for complex construction details, and resists micro-cracks. It is an odourless, non-toxic, and solvent-free product.

Rothoblaas

ROTHOBLAAS Front Band UV 210 - UV Airtightness Tape

FRONT BAND UV 210 is the universal tape made of TRASPIR EVO UV 210 monolithic membrane that provides excellent aesthetic performance even in the most demanding architectural solutions. Self-extinguishing tape classified B-s1,d0, that does not spread the flame in case of fire, contributing to the passive protection of the structure.

Rothoblaas

ROTHOBLAAS Hermetic Foam (Acoustic Airtight Foam) 750ml

HERMETIC FOAM is the single-component soundproofing foam sealant that ensures the airtightness of all kinds of cracks between different materials. Waterproof and airtight, even if trimmed after hardening, thanks to the closed-cell structure. Its low VOC content and very low emissions also make this sealing foam perfect for indoor use. Thanks to its the composition, it remains elastic and deformable over time, compensating for the movements of the wood and differential deformation of the building materials. Trust HERMETIC FOAM, the foam sealant with high elasticity tested and certified for sound insulation up to 63 dB

Rothoblaas

ROTHOBLAAS Invisi Band Transparent Water-resistant Adhesive Tape

INVISI BAND is the ideal single-sided tape for sealing timber joints transparently. Its powerful adhesive strength works on uneven surfaces and materials as diverse as timber and concrete. This tape offers transparency for easy inspection and maintains the natural aesthetics of timber, perfect for heritage projects. With a temperature resistance of -40°C to +120°C, it withstands the most extreme climatic conditions. It is easy to install, impermeable to water and air, and available in different sizes to cover standard and non-standard joints. A reliable solution for durable seals.

Rothoblaas

ROTHOBLAAS Membrane Glue

MEMBRANE GLUE, the cost-effective adhesive glue for sealing membranes. MEMBRANE GLUE is a solvent-free acrylic adhesive with good adherence to the most common supports. It offers a good compromise between adhesion and fast drying of the outer film, allowing application on vertical surfaces without slipping problems.

Rothoblaas

ROTHOBLAAS Nail Band (Butyl Nail Sealing Tape)

NAIL BAND butyl nail point sealant tape is a butyl sealant developed for sealing perforations in membranes caused by fastening ventilation battens. Thanks to its modified butyl formulation, it ensures excellent durability even when subjected to thermal stress. Also suitable for installation at low temperatures.

Rothoblaas

ROTHOBLAAS Plaster Band IN (Indoor Plasterable Adhesive Tape)

PLASTER BAND IN is for application inside the building envelope. The high-adhesion tapes are ideal for application on most surfaces, even at low temperatures. Made of technical fabric, they can be plastered after installation. The pre-cut liner allows for quick and easy installation and a high level of aesthetics due to the possibility of concealing the tape behind claddings or plaster. Full width liner tape features a 20mm strip of adhesive on the top face of the tape perfect for application on to windows before installation. Split liner tape has adhesive on one side with the liner split at set widths for easy application in corners.

Rothoblaas

ROTHOBLAAS Plaster Band OUT (Outdoor Renderable Adhesive Tape)

PLASTER BAND OUT is for application outside the building envelope. The high-adhesion tapes are ideal for application on most surfaces, even at low temperatures. Made of technical fabric, they can be rendered over after installation. The pre-cut liner allows for quick and easy installation and a high level of aesthetics due to the possibility of concealing the tape behind claddings or plaster. Full width liner tape features a 20mm strip of adhesive on the top face of the tape perfect for application on to windows before installation. Split liner tape has adhesive on one side with the liner split at set widths for easy application in corners.

Rothoblaas

ROTHOBLAAS Seal Band Airtightness Tape (60mm x 25m)

The pre-shapeable carrier allows efficient and agile sealing of concave or convex corners and edges. The SEAL BAND tapes for indoor use are available with pre-cut liner for quick and easy installation. Reinforced paper support, ideal for indoor use; airtightness guaranteed over time. The SEAL BAND tape is part of Rothoblaas products, tested by the PassiveHouse Institute as airtight certified components.

Rothoblaas

ROTHOBLAAS Smart Band Tearable Liner Airtightness Tape

The SMART BAND universal single-sided tape has a unique separating film which, thanks to a special treatment, can be divided at any point without pre-cutting, thus adapting to any installation requirement. The special composition of the support makes the tape particularly resistant to tearing and mechanical stress, thanks to its high deformability. Storage is made easier thanks to the easy splitting liner, which means that only a few sizes can be stored to meet any construction requirement. Extremely versatile, it can be used for a wide range of applications.

Rothoblaas

ROTHOBLAAS Smart Foam (Foam Sealant)

General purpose foam sealant. The special formula controls the foam’s expansion post-application, preventing excessive pressure on the glued elements. Compatibility for indoor use tested and certified by EC1 plus.

Rothoblaas

ROTHOBLAAS Speedy Band Airtight Tape (without release liner)

SPEEDY BAND universal tape can be conveniently applied to both the inside and outside of the building envelope, providing a fast and secure seal on most common supports. The absence of a separating film ensures faster installation and less waste to be disposed of, saving time and resources.

Rothoblaas

ROTHOBLAAS Traspir 150 (Breather Membrane) [BBA]

The highly breathable membrane TRASPIR 150 optimises airtightness, limiting the uncontrolled passage of air and protecting the structure from the entry of hot draughts in summer and cold draughts in winter. Available with or without integrated tape and also in a 3-metre version. It consists of a microporous film and protective polypropylene layers and is designed for application on the external and internal sides of walls and roofs.

Rothoblaas

ROTHOBLAAS Traspir 200 (Breather Membrane) (1.5m x 50m)

The TRASPIR 200 highly breathable membrane optimises the structure wind tightness, acting as a protection from the entry of hot draughts in summer and cold draughts in winter. Its high mass per unit area makes it the ideal membrane even on roofs with a low slope and during construction. The integrated double tape with increased width offers a perfect sealing and a perfect protection against heavy rain.

Rothoblaas

ROTHOBLAAS Traspir Adhesive 260 (Breathable Self-adhesive Membrane) (1.45m x 50m)

TRASPIR ADHESIVE 260 is the self-adhesive membrane that ensures strong adhesion even on the roughest substrates. The special patented adhesive allows it to retain its breathable properties while still ensuring a secure seal. It features an Sd value of just 0.22 m and a very high capacity to speed up installation. The adhesive surface prevents the formation of airflow behind the membrane in case of accidental breakage or failure to seal.Thanks to the patented glue, it remains perfectly breathable even when fully bonded: the fully self-adhesive surface of the membrane allows fast and safe installation without compromising performance. It is ideal for pre-processing in the factory and also offers protection for CLT elements during transport and construction.

Rothoblaas

ROTHOBLAAS Traspir ALU 200 (Reflective Breather Membrane) (1.5m x 50m)

The highly breathable reflective TRASPIR ALU 200 membrane is ideal for installation on both the external and internal sides of the roof. It optimizes the wind tightness of the structure, protecting it from the entry of hot air in summer and cold air in winter. Resistant thanks to its high mass per unit area, it is equipped with double integrated tape.

Rothoblaas

ROTHOBLAAS Traspir EVO 160 TT (Monolithic Breather Membrane) (1.5m x 50m)

The highly breathable monolithic membrane TRASPIR EVO 160 provides waterproofing and airtightness, as well as excellent fire behaviour (B-s1, d2) and high UV stability. It consists of a monolithic extruded elastomeric film between two polypropylene protection layers and is designed for installation both on the inner and outer side of the roof.

Rothoblaas

ROTHOBLAAS Traspir EVO Seal 200 (Monolithic Breather Membrane) (1.5m x 50m)

The TRASPIR EVO SEAL 200 highly breathable monolithic membrane is resistant to puncture by screws, nails and staples. This resistance has been certified after subjecting the membrane to stringent tests. The oversized TPU film ensures that the membrane remains waterproof even in the event of a screw or nail puncture without the need for additional products. The installation is quick and time-saving.

Rothoblaas

ROTHOBLAAS Traspir EVO UV 115 (Monolithic Breather Membrane) (1.5m x 50m)

The TRASPIR EVO UV 115 monolithic membrane ensures permanent resistance to UV rays with exposure with open joints up to 30 mm wide, and with up to 20% of the surface uncovered. Thanks to the special chemical composition that is flame retardant, TRASPIR EVO UV 115 is suitable for use on applications on facades in direct contact with the ventilation chamber, or in cases in which is visible in internal environments. It features an innovative technology that allows it to be used even on metal façades with high temperature fluctuations, without compromising its performance. TRASPIR EVO UV 115 membrane is provided with a LCA - Life Cycle Assessment - declaration.

Rothoblaas

ROTHOBLAAS Traspir EVO UV 210 TT (Monolithic UV Breather Membrane) (1.5m x 50m)

TRASPIR EVO UV 210 is the highly breathable monolithic membrane characterized by exceptional UV resistance and excellent flame retardant properties. It consists of a monolithic film in acrylic compound coated on a polyester reinforcement and is designed for application on the external side of walls. With open joints exposure with a width up to 50 mm and a maximum of 40% uncovered area, TRASPIR EVO UV 210 membrane guarantees permanent UV stability. The aesthetic appearance is excellent: thanks to the mass per unit area and the polyacrylate mix, the membrane guarantees high thermal and dimensional stability, features that prevent the formation of swelling during installation. The integrated double tape ensures a perfect seal; the final appearance is guaranteed by the use of FRONT BAND UV 210, made with the same support, to finish in with the membrane.

Rothoblaas

ROTHOBLAAS Traspir NET 160 (Breather Membrane) (1.5m x 50m)

TRASPIR NET 160 is a highly breathable microporous membrane for roofing. Thanks to its three layers: non-woven surface fabric, breathable microporous polypropylene film and reinforcing grid that provides great strength. It is a waterproofing solution that ensures great thermal stability.

Rothoblaas

ROTHOBLAAS Universal Primer - 1kg

The universal liquid PRIMER compensates all the surface cavities and improves adhesion of all tapes and sealants. Ready-to-use, quick-drying.

Rothoblaas

ROTHOBLAAS Vapor NET 110 (Reinforced Vapour Control Membrane) (1.5m x 50m)

VAPOR NET, the light and resistant vapour control membrane. VAPOR NET 110 is a lightweight vapour control membrane with high mechanical performance thanks to the reinforcing grid. The vapour control membrane regulates the passage of moisture, preventing the formation of interstitial condensation within the insulation package.