Floor Insulation

Ultimate Insulation

Ultimate Insulation Foam Glass Aggregate/Gravel

Ultimate Insulation foam glass is a highly heat-insulating, ecological alternative for insulation to building floors from 99% recycled glass. Certification DIN 4102 (DIN EN 13501-1)DIBT Approval Z – 23.34 – 1579Construction material class A1 and suitable as fire extinguishing agent.

Steico

STEICO Flex 036 (Inserts for I-Joists) - 575mm x 1220mm

Steico Flex Inserts are a versatile and eco-friendly wood-based insulation batt suitable for on-site cutting for fitment into I Joists. Application: Flexible cavity insulation for infilling I Joists. Certification: Fire Class: E - EN 13501-1Produced and supervised according to EN 13171Board designation: WF – EN 13171 – T3 – TR1 – AFr5 – MU 2

Steico

STEICO Flex 036 - 375mm x 1190mm

Steico Flex 036 is a versatile and eco-friendly wood-based insulation batt suitable for insulating lofts, floors, walls, ceilings, partition walls, service zones & drywalling providing both thermal and acoustic insulation Certification: Fire Class: E - EN 13501-1Produced and supervised according to EN 13171Board designation: WF – EN 13171 – T3 – TR1 – AFr5 – MU 2

Steico

STEICO Flex 036 - 575mm x 1190mm

Steico Flex 036 is a versatile and eco-friendly wood-based insulation batt suitable for insulating lofts, floors, walls, ceilings, partition walls, service zones & dry walling providing both thermal and acoustic insulation Certification: Fire Class: E - EN 13501-1Produced and supervised according to EN 13171Board designation: WF – EN 13171 – T3 – TR1 – AFr5 – MU 2

IndiNature

IndiNature IndiTherm Hemp Flexibatt Insulation

A flexible thermal insulation ‘batt’ made from UK crops. IndiTherm® can be friction fit between structural framing or against masonry - with excellent rigidity to resist slumping. Healthy and soft to the touch for installers. Very large carbon savings - net negative embodied carbon. Building occupants will benefit from the exceptional thermal and moisture buffering properties of this sustainable material. It has the added property of low-density heat storage, which means indoor temperatures stay warm in winter and cool in summer. Durability tested.

Knauf Insulation

Knauf Omnifit Slab 35 (600mm wide)

Knauf OmniFit Slab 35 is an alternative to existing flexible slabs and has a high level of thermal performance. OmniFit Slab is available in both 600mm and 400mm wide options to suit use between timber or metal studs at either 600mm or 400mm centres. OmniFit Slab is odourless, rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: Earthwool OmniFit Slab is typically used for the thermal and acoustic insulation of a wide variety of constructions such as timber and metal stud partitions, timber frame walls, between rafters and timber floors. Certification: ISO9001 - Quality Management Systems ISO14001 - Environmental Management BS OHSAS18001 - Occupational Health & Safety Management Systems ISO50001 - Energy Management Systems EN 13162 - Manufactured in accordance with A+ rating on BRE Green Guide [[end app]]

Knauf Insulation

Knauf FrameTherm® Roll 32

  FrameTherm Roll 32 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 2x570mm to suit commonly used timber stud spacing. FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf FrameTherm® Roll 35

FrameTherm Roll 35 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 3x380mm to suit commonly used timber stud spacing. FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf FrameTherm® Roll 40

FrameTherm Roll 40 is a specialist product for timber frame construction. Earthwool FrameTherm rolls are used for ‘friction fitting’ between timber studs and rafters. Rolls are fully cut into 2x570mm to suit commonly used timber stud spacing. Earthwool FrameTherm Rolls are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: For use in external walls and warm roofs in timber frame construction. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Loft Roll 44 (Combi-Cut)

Knauf Loft Roll 44 is available in a range of thicknesses with a thermal conductivity of 0.044 W/mK. Combi-cut products have partially cut perforations, providing the flexibility to be used between joists at either 400mm or 600mm centres, or used unsplit as a full-width roll. Ready-cut products are fully cut and are designed to be used between joists at 600mm centres. Knauf Loft Roll 44 are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Application: Earthwool Loft Roll 44 is primarily used for the thermal insulation of pitched roofs at ceiling level. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

Knauf Loft Roll 40 (Combi-Cut)

Knauf Loft Roll 40 provides a superior performance with a thermal conductivity of 0.040 W/mK. Available with partially cut perforations, Combi-cut has the flexibility to be used between joists at either 400mm or 600mm centres or used unsplit as a full-width roll. Knauf Loft Roll 40 are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria Application: Knauf Loft Roll 40 is primarily used for the thermal insulation of pitched roofs at ceiling level. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide

Knauf Insulation

140mm Knauf FrameTherm® Slab 32 (Pack of 4)

FrameTherm Slabs 32 is a specialist product for timber frame construction. Earthwool FrameTherm slabs are used for ‘friction fitting’ between timber studs and rafters. Slabs are manufactured with a width of 570mm to suit studs spaced at 600mm centres. FrameTherm Slabs are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria. Certification: ISO9001 - Quality Management SystemsISO14001 - Environmental ManagementBS OHSAS18001 - Occupational Health & Safety Management SystemsISO50001 - Energy Management SystemsEN 13162 - Manufactured in accordance withA+ rating on BRE Green Guide