Own fleet delivery

Fast & efficient delivery via our own fleet of 26T trucks and vans.

Independent distributor

Established in 2012, we are a family-owned business.

In-house technical help

In-house support to help you make the very most of your project.

Quick & easy ordering

Use our online quoting system to gain competitive prices on our products.

chevron_left chevron_right
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
chevron_left
chevron_right

PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane - 1.5 x 50m


Proctor Wraptite combines important properties of vapour permeability and airtightness in one affordable self-adhering membrane. It fully bonds to virtually any substrate, with a key benefit being its ease of installation, negating the requirement for sealants or tapes. It makes a significant contribution to a building’s thermal performance by preventing lateral air movement, but it also contributes to a healthy living environment and a healthy building thanks to its vapour permeability. With an Sd of 0.039m, it provides a high degree of vapour permeability in a commercial-quality, self-adhered, airtight breathable membrane.

Read more Read less

Key points
  • Airtight yet vapour permeable
  • No primer required
  • Tough facer laminate resists punctures and tears during construction
  • Lightweight and easy to install
  • Wide service temperature range
  • Can be left exposed for up to 120 days during construction
  • No VOC's

Specification

Width: 1.5m
Length: 50m
Nominal Thickness: 0.65mm
Sd value: 0.039m
Reaction to Fire: Class B-s1,d0 tested ti EN 13501-1 (on Class A1 or A2-s1,d0 substrate)
Water Penetration: Class W1 tested to EN 1928 Method A
Peel Adhesion: Equal to or greater than 5.01 N/10mm tested to EN 1939
Tensile Strength: MD 417N / CD 252N tested to EN 12311-1
Tear Resistance: MD 412N / CD 286N tested to EN 12310-1
Install Temperature: -10℃ to +60℃
Service Temperature: -40℃ to +100℃
Material: Triple-layer polypropylene micro-porous film laminate, with a proprietary acrylic moisture vapour permeable adhesive and silicone-coated PET release liner.

[[end spec]]

PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane - 1.5 x 50m
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane
PROCTOR Wraptite Self-adhesive Vapour Permeable Airtight Membrane

Best Seller

PROCTOR Spacetherm® Silica Aerogel Blanket

Aerogel is a synthetic porous ultralight gel-like material created by removing the liquid component from gel and replacing it with gas, without any degradation to the gel structure. This produces an extremely low thermal conductivity which is perfect for thermal insulation.

Datasheets, Guides and Documents

Product Datasheet (TDS)

You might also like

chevron_left chevron_right