Pro Clima

Pro Clima

60mm Pro Clima Uni Tape - Airtight Tape (30m)

UNITAPE is a low-cost paper-based airtight sealing tape with solid acrylic glue. It can be used indoors for sealing airtight membranes and wood particle boards. It is easily torn by hand and thanks to its stiff paper-based composition, Uni Tape can be folded to form precise 90° corners making it ideal for sealing components at corner junctions Certifications: Construction in adherence with standards: for airtight bonding in accordance with DIN 4108-7, SIA 180 and RT 2012 Excellent values in the hazardous substance test have been tested according to the ISO 16000 evaluation scheme

Pro Clima

80m Pro Clima Duplex Double Sided Membrane Tape

Pro Clima Duplex tape is a double-sided airtight and moisture-resistant sealing tape for use internally or externally. The special acrylate adhesive is highly water resistant and the easily removed release film allows for quick application. Duplex tape can be used to connect membranes to hard smooth surfaces (for example steel beams) and for sealing membrane overlaps quickly and easily. Certifications: Construction in adherence with standards: for airtight bonding in accordance with DIN 4108-7, SIA 180 and RT 2012 Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Aerosana Visconn Fibre-reinforced Spray/Paintable Airtight Sealant Membrane

Pro Clima Aerosana Visconn Fibre is a sprayable or paint on humidity-variable and vapour permeable airtight pquid fibre-reinforced membrane. Great for use in areas where roll membranes and tapes could be difficult to install. Aerosana Visconn can be used on Brick (smooth or rough), blockwork, concrete, stone, wood sheathing boards, and timber surfaces. Can fill in cracks and gaps up to 3mm wide.

Pro Clima

Pro Clima Aerosana Visconn Spray/Paintable Airtight Sealant Membrane

Pro Clima Aerosana Visconn is a sprayable or paint on humidity-variable and vapour permeable airtight liquid membrane. Great for use in areas where roll membranes and tapes could be difficult to install. Aerosana Visconn can be used on Brick (smooth or rough), blockwork, concrete, stone, wood sheathing boards, and timber surfaces. Can fill in cracks and gaps up to 3mm wide.

Pro Clima

Pro Clima Compego Tape - 60mm x 25m

COMPEGO is used to bond overlaps between vapour check and airtightness membrane securely, air-tightly and permanently as well as for indoor and exterior joints between such membranes. Also suitable for bonding butt joints between wood-based panels. 

Pro Clima

Pro Clima Constivap 2.3 Plus - 1.5m x 50m

Pro Clima Constivap 2.3 Plus vapour check and airtight membrane is designed and suited for use on internal roofs, walls, and ceilings. It offers excellent value for money and performance in situations where the levels of humidity and moisture in the building will not change significantly over time. Like many Pro Clima membranes, “Plus” means reinforced. There is a super-strong polypropylene mesh within Constivap 2.3 Plus. Certifications: Complies with CE requirements.

Pro Clima

Pro Clima Contega Fiden Exo (Expansion Joint Tape)

Pro Clima Contega Fiden Exo is an expanding sealing tape for exterior use. It is vapour open and resistant to wind driven rain. The tape will continually expand and compress to allow for movement between the frame and wall whilst maintaining a full weather-tight seal. Includes one self-adhesive surface for easy installation onto window and door frames. Application: Can be plastered over: Yes Certifications: Fulfils the highest requirements: BG1 quality and fire rating B1, P-NDS04‑1001 RAL quality-tested installation

Pro Clima

Pro Clima Contega Solido EXO (External Single-sIded Corner Adhesive Tape)

CONTEGA SOLIDO EXO80 is the perfect adhesive tape for exterior windtight joints that are resistant to driving rain between windows or doors and adjacent building components made of wood or mineral subsurface such as concrete and masonry, full-surface adhesion.The modified waterproof SOLID adhesive ensures quick and permanent adhesion to the subsurface. Certifications: Independently confirmed suitability: tests in accordance with MO-01/1 passed at IFT in Rosenheim (DE)

Pro Clima

Pro Clima Contega Solido EXO-D (External Double-sIded Corner Adhesive Tape)

CONTEGA SOLIDO EXO-D80 is the perfect adhesive tape for exterior windtight joints that are resistant to driving rain between windows or doors and adjacent building components made of wood or mineral subsurfaces such as concrete and masonry, full-surface adhesion. The adhesive zone on the fleece side allows for easier adhesion to windows and doors if applied before they are installed. The stuck joint is immediately windproof and can be subjected to loading. The fleece can simply be plastered over in accordance with the installation instructions. Certifications: Independently confirmed suitability: tests in accordance with MO-01/1 passed at IFT in Rosenheim (DE)

Pro Clima

Pro Clima Contega Solido SL (Internal Single-sIded Corner Adhesive Tape)

CONTEGA SOLIDO  is a full-surface adhesive tape that can be plastered over. It ensures interior airtight and vapour-retarding sealing of windows and doors to adjacent building components made of wood and mineral sub-surfaces such as concrete and sand-lime brick. The modified waterproof SOLID adhesive ensures quick and permanent joints with the sub-surface. The stuck joint is immediately airtight and can be subjected to loading. Certifications: Independently confirmed suitability: tests in accordance with MO-01/1 passed at IFT in Rosenheim (DE) Construction in adherence with standards: for airtight bonding in accordance with DIN 4108-7, SIA 180 and RT 2012 Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Contega Solido SL-D (External Double-sIded Corner Adhesive Tape)

Pro Clima Contega Solido  is a full-surface adhesive tape that can be plastered over. It ensures interior airtight and vapour-retarding sealing of windows and doors to adjacent building components made of wood and mineral sub-surfaces such as concrete and sand-lime brick. The modified waterproof SOLID adhesive ensures quick and permanent joints with the sub-surface. The stuck joint is immediately airtight and can be subjected to loading.  For application on doors and windows prior to installation in the building. For retrofit on already installed doors and windows, use Pro Clima Contega Solido SL100. Certifications: Independently confirmed suitability: tests in accordance with MO-01/1 passed at IFT in Rosenheim (DE) Construction in adherence with standards: for airtight bonding in accordance with DIN 4108-7, SIA 180 and RT 2012 Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima DA - Membrane

Pro Clima DA vapour check and airtight membrane is designed and suited for use above rafters on sarking boards beneath insulation. Suited to all externally diffusion-permeable roof structures, Pro Clima DA vapour check and airtight membrane is waterproof and water resistant. This DA vapour check and airtight membrane will protect the structure during construction and it can be walked on too. Certifications: CE marked to DIN EN 13984.

Pro Clima

Pro Clima Dasatop - 1.5m x 50m (75m²)

Pro Clima Dasatop - 1.5m x 50m (75m²)   Certifications: CE marked to DIN EN 13984.

Pro Clima

Pro Clima DB+ - 1.35m x 50m

Pro Clima DB+ is designed to reduce interstitial condensation and provide a consistent, airtight internal seal. DB+ vapour check membrane allows vapour diffusion in summer to allow structural components in the build to dry out and it prevents as much vapour diffusion in winter months to ensure the build is protected from vapour penetration and moisture. This intelligent vapour check membrane from Pro Clima is manufactured from recycled paper that’s been made strong with a reinforcement layer of plasticiser-free PE film. DB+ is an environmentally friendly product that will be favoured by eco-builders and sustainable contractors. Certifications: - Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Extoseal Encors

Pro Clima Extoseal Encors is a highly elastic butyl rubber airtight and watertight flashing tape. It is most commonly used as a weatherproof and watertight tape for sealing around window sills, door thresholds or any area where standing water may be present. The high elasticity of Extoseal Encors allows it to be easily moulded around corners and junctions while maintaining the same level of water-repellence and weatherproofing Certifications: Independently confirmed suitability: tests in accordance with MO-01/1 passed at IFT in Rosenheim (DE) Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Extoseal Magov Butyl Tape (60mm x 10m)

Pro Clima Extoseal Magov is a highly flexible butyl rubber adhesive sealing tape for interior and exterior use. Magov can be used for sealing around penetrations in airtight membranes and for between walls and floors. The tape will stick to all Pro Clima membranes and tapes.

Pro Clima

Pro Clima Intello Plus - Vapour Check Membrane

Pro Clima Intello Plus Intelligent airtight vapour check features humidity variable diffusion resistant. It gives maximum protection to thermal insulation where moisture entry may have occurred. This may be through leaks, damp installed building materials or diffusion through adjoining structural surfaces. Intello Plus features the world's best and most effective variable diffusion resistance. This ensures optimum protection for all fibrous insulating materials in all constructions, whether they are vapour diffusion-permeable or vapour diffusion resistance externally such as pitched roofs with bitumen sheeting or metal sheet roofing, flat roofs and walls with a diffusion resistant exterior cladding. Certification: Meets with the durability requirements of EN 13984Passive House Institute Certified Component - phABBA - 14/5155CE Mark

Pro Clima

Pro Clima Kaflex Duo - Airtight Cable Grommet (Pack of 15)

If pipes or cables penetrate the airtightness layer, they too must be securely sealed. The most suitable means of doing this is with airtightness grommets made from EPDM. This flexible material allows a tight fit, and KAFLEX allows for a secure feed-through for cables and pipes. KAFLEX cable grommets feature an integrated adhesive with a release paper for ease of application.

Pro Clima

Pro Clima Kaflex Mono - Airtight Cable Grommet (Pack of 15)

If pipes or cables penetrate the airtightness layer, they too must be securely sealed. The most suitable means of doing this is with airtightness grommets made from EPDM. This flexible material allows a tight fit, and KAFLEX allows for a secure feed-through for cables and pipes. KAFLEX cable grommets feature an integrated adhesive with a release paper for ease of application.

Pro Clima

Pro Clima Kaflex Multi - Airtight Cable Grommet (Pack of 10)

If pipes or cables penetrate the airtightness layer, they too must be securely sealed. The most suitable means of doing this is with airtightness grommets made from EPDM. This flexible material allows a tight fit, and KAFLEX allows for a secure feed-through for cables and pipes. KAFLEX cable grommets feature an integrated adhesive with a release paper for ease of application.

Pro Clima

Pro Clima Kaflex Post - Retrofit Airtight Cable Grommet (Pack of 10)

Pro Clima Kaflex Post is an airtight pipe and cable sealing grommet for sealing around pipes and cables of upto 20mm diameter. It is made from Tescon Vana tape that has been 3rd party tested and proved to remain airtight for at least 100 years. Kaflex Post is especially useful during

Pro Clima

Pro Clima Orcon F - Flexible airtight solid acrylic sealant

ORCON F has exceptionally high adhesion properties while also being elastic. Its outstanding adhesion to building materials gives the joint the necessary safety and longevity. It is suitable for bonding all of the pro clima vapour checks and air-proofing membranes, PE/PA/PP and aluminium foils to other building materials regardless of smooth, rough or smooth stone surface. Consumption Figure: Bead Coverage 5mm ~ 15m 8mm ~ 6m  

Pro Clima

Pro Clima Orcon Multibond - Membrane Adhesive Strip Roll (Pack of 2)

ORCON Multibond

Pro Clima

Pro Clima Pressfix Tool

Pro Clima’s Pressfix tool is the easiest and safest way to quickly and evenly apply pressure to a tape or adhesive membrane. Pressing the adhesive into the surface with a Pressfix tool ensures a permanent maximum strength bond can be achieved every time.

Pro Clima

Pro Clima Roflex - Airtight Pipe Grommet

If pipes or cables penetrate the airtightness layer, they too must be securely sealed. The most suitable means of doing this is with airtightness grommets made from EPDM. This flexible material allows a tight flexible fit, and ROFLEX is available in all common diameters. ROFLEX grommets should be sealed to the membrane with TESCON No. 1/VANA.    

Pro Clima

Pro Clima Roflex Solido Airtight Pipe Grommet

ROFLEX SOLIDO is a plaster-able airtightness EPDM grommet which features full contact solid acrylic adhesive. Pipe penetrations through masonry walls often lead to considerable air leakage. ROFLEX SOLIDO can be bonded directly to masonry walls and is suitable for internal or internal applications. Even when pipes are pushed or pulled at a later stage, an airtight and weathertight seal is still retained. The new ROFLEX SOLIDO grommets are supplied with the SOLIDO EXO fleece tape applied.  

Pro Clima

Pro Clima Solitex Adhero 3000 - Self Adhesive Vapour Permeable Membrane (1.5m X 30m)

Pro Clima Solitex Adhero is a self-adhesive, vapour permeable external breather membrane for use on masonry and timber structures. It can be quickly applied to immediately provide a wind and weathertight seal on buildings. Once applied, a costly construction tent is not required to protect the building from the elements during construction.

Pro Clima

Pro Clima Solitex Fronta Humida - Wall Lining Membrane (1.5m x 50m)

SOLITEX FRONTA HUMIDA is a wind, water and weatherproof vapour open breathable membrane that prevents any potential moisture build-up in the wall. The Solitex Fronta Humida is to be used on timber frames where woodfibre insulation is used externally behind a masonry/brick exterior wall. Due to the membrane’s slight diffusion resistance, the wood fibre insulation boards behind the masonry wall are protected from unsafe levels of moisture that occur within the ventilated cavity. This is necessary due to the low level of ventilation achieved behind a masonry wall.

Pro Clima

Pro Clima Solitex Fronta Quattro - Open Facade Membrane (1.5m x 50m)

SOLITEX FRONTA QUATTRO permanently protects the insulation from wind and rain. For use with closed and open façades (open jointed cladding up to a gap width of 35 mm. Cladding width = at least 3 x gap width) in accordance with installation guidelines. Certification: CE Mark

Pro Clima

Pro Clima Solitex Fronta WA - Wall Lining Membrane

SOLITEX FRONTA WA is a monolithic fully windtight breather membrane specially designed to protect and enhance timber frame structures. It can be applied in the factory to the external face of pre-fabricated wall panels, or on site to timber frame wall assemblies. Certification: BBA - 14/5155CE Mark

Pro Clima

Pro Clima Solitex Plus - Vapour Permeable Membrane

SOLITEX PLUS is the Next Generation of High-Performance vapour permeable Underlay. With an impressive range of characteristics such as highVapour Permeability, Extreme Watertightness, High Nail Tear Resistance and Thermostability, SOLITEX PLUS offers superior protection againstcondensation risk and extreme resistance against pelting rain. SOLITEX PLUS, from pro clima is a Diffusion-Open vapour permeable membrane. Certification: BBA - 14/5155CE Mark

Pro Clima

Pro Clima Solitex Plus Connect - Vapour Permeable Membrane + Pre-applied Tape (1.5m x 50m 75m²)

SOLITEX PLUS CONNECT is the Next Generation of High-Performance vapour permeable Underlay. With an impressive range of characteristics such as highVapour Permeability, Extreme Watertightness, High Nail Tear Resistance and Thermostability, SOLITEX PLUS offers superior protection againstcondensation risk and extreme resistance against pelting rain. SOLITEX PLUS, from pro clima is a Diffusion-Open vapour permeable membrane. Certification: Meets with the durability requirements of EN 13984Passive Hosue Institute Certified Component - phABBA - 14/5155CE Mark

Pro Clima

Pro Clima Stoppa

Stoppa ensures quick and lasting, secure airtight installation of cables in conduits. Conduit grommets (e.g. ROFLEX 20 or ROFLEX 20 multi) are available for the airtight connection of conduits to the vapour retarder and airtightness membrane. Certifications: Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Tescon Invis

TESCON INVIS provides a permanent seal for overlaps in membranes. It is a plain black airtight tape with nothing printed on the top side, so is ideal for use on timber frame buildings where the membrane and tape can be seen through gaps in external cladding. Certifications: Construction in adherence with standards: for airtight bonding in accordance with DIN 4108-7, SIA 180 and RT 2012 Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Tescon Naideck - Sealing Adhesive Tape (50mm x 20m)

TESCON NAIDECK is a durable airtight sealing double-sided butyl rubber tape for sealing around nail and screw penetrations making it almost impossible for water to seep in; penetrating deep into the pores of membranes and fibreboards, providing durable sealing around nail holes.

Pro Clima

Pro Clima Tescon Primer RP (1L bottle)

TESCON Primer RP can be applied to wood, wood fibreboards, block structure, roof structure, walls and concrete floors. TESCON Primer RP isrecommended for the preparation of the surface for the application of pro clima tapes such as TESCON NO.1, TESCON VANA, and TESCON PROFIL, aswell as the adhesive compounds ORCON F/ORCON LINE and ECO COLL. Consumption Figure: Adhesive Width Coverage 60mm ~ 75m 75mm ~ 60m 150mm ~ 30m  

Pro Clima

Pro Clima Tescon Profect 50 (Pre-folded Corner Tape) - 30m x 50mm (12/38mm Split)

Pro Clima Tescon Profect 50 Pre-folded Corner Tape is the perfect choice for quickly, simply and tidily sticking corners. The moisture-resistant adhesive ensures the tape will keep corners sealed for years to come. With pre-folding and exposed first adhesive surfaces, it's easy to use and even easier to work with thanks to its malleable fleece backing, which can be plastered over directly. The tape is available in 12/38 and 25/35 mm separations, meeting all standards for airtight bonding (DIN 4108-7, SIA 180, RE 2020). Certifications: Construction in adherence with standards: for airtight bonding in accordance with DIN 4108-7, SIA 180 and RE 2020 Excellent values in hazardous substance testing, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Tescon Profil (Corner Adhesive Tape) - 30m x 60mm (12/48mm Split)

TESCON PROFIL is perfect for sealing off angled joints with an airtight finish.Created with two release paper strips, this NSAI-accredited product has been specifically developed to make easy work of sealing window corners, one junction at a time.Engineered with Acrylate which is free of any solvents or softeners, this tape is suitable for both interior and exterior use and can be used with various membranes including sarking and roof lining. Certifications: Construction in adherence with standards: for airtight bonding in accordance with DIN 4108-7, SIA 180 and RT 2012 Excellent values in the hazardous substance test, has been tested according to the ISO 16000 evaluation scheme

Pro Clima

Pro Clima Tescon Sprimer Spray Can Primer

Pro Clima Tescon Sprimer is a spray-on primer used before applying airtight tapes. It prepares and stabilises absorbent surfaces, masonry, dust-producing surfaces, fibrous surfaces or any surface that may separate (come away/break) when forces are exerted on the bond.  It ensures the adhesion of tapes is successful on all the surfaces commonly found on a building site.

Pro Clima

Pro Clima Tescon Vana - Sealing Adhesive Tape (30m)

TESCON VANA is used to form a secure and permanent seal of overlaps between foil and fleece membranes (Intelligent vapour checks and airtightness membranes, roof underlays and wall membranes) and joints between such membranes and smooth, non-mineral surfaces.